AC85-265V 100W PIR Microwave Radar Body Motion Sensor Module
220V 40W 50Hz Acousto Optic Inductive Switch Silicon Controlled Rectifier
220V Sound light control
Features:
1. The switch shell is PC, fire retardant.
2. Wide temperature limit, – 20 ℃~65C, normal operation.
3. It can load energy-saving lamps, LED lamps, fluorescent lamps, etc.
4. High sensitivity and reliability, realizing smart home, safe, power saving and durable.
5. The high-power silicon controlled rectifier is used to control the output, which can fully meet various needs.
6. Automatic light metering: it is controlled by light sensitivity, and it is not sensitive during the day or under strong light, but can be sensitive at night or under weak light.
7. Full automatic induction: when the switch reaches a certain decibel of sound, the light will turn on automatically, and it will turn off automatically after a certain time delay, saving energy and electricity.
8. Automatic delay: once the switch is triggered, if the sound stops, the time before the last stop is taken as the reference point to start the delay (the delay time is the time set by the switch through the resistor adjustment. The time is 30 seconds and 60 seconds
Specifications:
Size: 50 * 31MM
Voice sensitivity: 50DB
Applicable power:<60W
Delay time: 30/60 seconds
Input voltage: 110V-220V
Output voltage: 110-220V
Light control sensitivity: 15LUX
Drive power consumption: 0.01W
Wiring method:
L « and » N « inputs are printed on the plastic housing. The red line and black line are respectively connected to the live line and zero line of the family. » L1 « is printed on the plastic housing. The white line and white line at » N « outputs are directly connected to the driving power supply of the LED lamp.
Application:
It is applicable to the garage, corridor, walkway, entrance, toilet, elevator room and other public places in hotels, hotels, offices, factory warehouses, residential areas, etc. This switch can only load incandescent lamps (bulbs) and energy-saving light sources
Note:
The wiring shall be operated according to the instructions. Live working is not allowed. The lamp holder shall be installed in a damp proof place and directly installed on the wall or ceiling. No object shall be covered on the surface to avoid affecting the normal use of the lamp. Then directly connect the switch in series to the 220V live wire.
Package list:
Acousto optic inductive switch * 1
AC85-265V Radar Sensing
Features:
1. The switch shell is PC, fire retardant.
2. It can load energy-saving lamps, LED lamps, fluorescent lamps, etc.
3. High sensitivity and reliability, realizing smart home, safe, power saving and durable.
4. Automatic light metering: it is controlled by light sensitivity, and it is not sensitive during the day or under strong light, but can be sensitive at night or under weak light.
5. Full automatic induction: when the switch reaches a certain decibel of sound, the light will turn on automatically, and it will turn off automatically after a certain time delay, saving energy and electricity.
6. Automatic delay: once the switch is triggered, if the sound stops, the time before the last stop is taken as the reference point to start the delay (the delay time is the time set by the switch through the resistor adjustment. The time is 30 seconds and 60 seconds.
Specifications:
Induction: 4-8m
Input voltage: AC85-265V
Load power: LED ＜ 100W
Wiring method:
L « and » N « inputs are printed on the plastic housing. The red line and black line are respectively connected to the live line and zero line of the family. » L1 « is printed on the plastic housing. The white line and white line at » N « outputs are directly connected to the driving power supply of the LED lamp.
Application:
It is applicable to the garage, corridor, walkway, entrance, toilet, elevator room and other public places in hotels, hotels, offices, factory warehouses, residential areas, etc. This switch can only load incandescent lamps (bulbs) and energy-saving light sources
Note:
The wiring shall be operated according to the instructions. Live working is not allowed. The lamp holder shall be installed in a damp proof place and directly installed on the wall or ceiling. No object shall be covered on the surface to avoid affecting the normal use of the lamp. Then directly connect the switch in series to the 220V live wire.
Delivery list:
Microwave radar inductive switch * 1
